VMR Communications Ltd.

BreakWire Sensor

The Features of the BreakWire Sensor:

The BreakWire Sensor is compatible with both MIDA and EMIDS systems. This system uses 2 volts positive pulse output to trigger the transmitter..

Wire Loop up to 250 Meters with # 44 gauge wire.

Low power consumption.

Power Supplied from transmitter.Requires 9 volts D.C.from the transmitter. Used the LoBo or Spider transmitters.

Operating temperature - 40 degrees to +65 degrees Centigrade.

Low battery detect circuit shuts the unit down but will not cause a false alarm.

When the wire breaks the red LED will blink three times every minute. If you reattach the wire the sensor will re-arm it's self ready for the next alarm.

Applications include:

Home / Industrial automation.

Alarm / Security systems.

 

Power Consumption:

The BreakWire worst case current consumption occurs when it is in alarm mode, and is under 3.6 ma. Normal BreakWire operation requires less than 860 uA

 

 

 

 

Webmaster Larry Burkhardt